Drilling Consultant suite of programs consists or every day handy programs ready to run, no need to search around for different operational drilling programs everything in one place. The whole suite of programs include Drilling and Workover software for every day drilling and workover operations, including a full Daily Drilling report for onshore and offshore operations with built in daily cost.
This suite of programs is specifically put together for on site Drilling Consultants. the suite of programs covers everything an on site supervisor would require at any time to drill and complete a well. From Spud to completion.
A discounted suite of programs for Drilling Consultants and Rig Supervisors
Take a look at all the handy drilling and workover programs right when you need them Click here
Special Suite Discount. Click to enlarge
Special discount suite of programs YOU SAVE $2532.30
Choose a minimum of 3 programs.
Don’t Need All These, Just tell us which programs you want to build your own personal suite of drilling programs and we will build you a personalized program suite with your own selection of programs
A good starter would be DrillPro, Well Control, Casing Tally, Cement Plugs, Drilling Report
If you are drilling and completing then you could add in the Workover Office suite of programs which will give you a professional completion schematic, with over 2000 high resolution icons and graphics including Well Head graphics
Full API style Daily Drilling Report Email directly to the Office
People on Board
Daily Drilling Report, is very simple to use but very comprehensive, the Daily Drilling Report covers all daily drilling hydraulics and full reporting for mud data, formation data, bit record, supervision, for Onshore,Shallow Water Offshore and Deep Water reporting, for offshore rigs the report includes anchor tensions, weather report, people on board. Once the report is completed it can be emailed from within the program and also exported and saved to a local rig file.
Tubing Tally, is not just another simple tally spreadsheet this Tubing Tally is complete with BHA add in, KB Correction, the program will allow you to not only produce the standard type of oil field tally sheets which are automatically completed for you as you enter your pipe tally. But also includes a well bore completion schematic to produce professional well completion sketches, The library of completion tools consist of down hole tool icons for vertical wells and horizontal wells.
Tubing Tally also includes a Hi-Resolution final well report for both vertical and horizontal completions with a vertical and horizontal tool library. The program comes complete with a well bore diagram template for both vertical wells and horizontal wells. the library of hi-resolution graphics which will allow you to produce professional hi impact well bore schematics
Tubing Tally 32 Bit. Optional selection
Tbg Size, ID, ppf,
Drift sizes are auto updated
Weight in Air
Drift size is auto filled in for you from the database.
Depth plus BHA
Vertical Well Bore Graphic and Components
Horizontal Well Bore Graphic and Components
You can build a professional Well Bore Schematic with the available tools
You have the option of including the KB correction for accurate packer placement and leak isolation. As you enter the tubing lengths the capacities weight in air, buoyed weight plus corrected depths if a BHA is included are all automatically updated for you.
All the data you enter is linked to standard oil field tally sheets which can be printed or emailed
Rod Pump Completions graphic
This is the separate Rod Pump Completion program for rig supervisors that don’t need the full features in the Workover Office Professional version
You still have all the volumetric well bore calculations for isolating casing leaks along with cement plug, pipe in pipe out, calculations for plug backs and squeezes
Workover-Office-completion-graphics-and-calculations is a complete integrated system for the workover consultant or the workover office.
Workover Office graphics and calculations now cover both API and Metric units of measure
Vertical Well completion schematic
Rod Pump Well completion schematic
Directional Well completion schematic
Balanced Cement Plugs
Frac Manifold schematic
Packer un-setting forces and calculations
Tubing Movement Calculations
Any of the 1000+ hi-resolution completion tools can be rotated to any angle for a professional hi-impact well sketch
Workover-Office-completion-graphics-and-calculations includes an easy start with 17 of the most common well completions, plus Cement Plugs, Xtree schematic, Liners, Tie Backs, Packer Calculations, Field Testing Production Rates, Tubing Movement Calculations, Rod Pump Completions, Operator Report, 20 item GLM spacing, operators report and field reports plus Final Well Completion Report.
Workover-Office-completion-graphics-and-calculations includes an extended library of over 1000 hi-resolution workover and completion graphics completely automated on button clicks instead of drag and drop to give you a first class professional finish to your Wellbore schematics. Your final well report can be exported to your well file with a simple click as a single linked Excel worksheet, or emailed directly to the client
Workover-Office-completion-graphics-and-calculations, now includes the layout for a Frac Manifold iron library added to the program, complete with straights, 90° bends, tees, valves, pressure shut down valves, the complete package for a professional graphic output
Easy to use Gas Lift Mandrel Spacing program (The latest version now includes API and Metric units)
Simply update the tubing tally,
Enter the required depths of each mandrel.
The program works out which joint or stand of tubing to install the Gas Lift Mandrels
Also with the option of tubing racked back in the derrick or new tubing picked up from the pipe racks. The program handles the placement of up to 20 GLMs
The Packer Calculation program will help you avoid having a packer unset during testing or squeezing operations.
The program also includes tubing movement calculations and a field estimate production rate calculator along with BHT chart
The program covers both compression and tension packers also maximum allowable swabbing depth for upstrain packers. Since the forces are related to several differing factors you you have the option of selecting the type of flow, whether there is no flow, mud/brine in the tubing, gas or oil flow. Then select the type of packer upstrain (tension) or set down (compression). This data is used in the forces applied to a pkr calculations.
The program will warn you if fores applied to the packer from above or below will force the packer to unset.
A complete Workover Rig Maintenance program for Excel
Considering the number of Workover Rigs off contract and stacked it is now highly important that contractors have their equipment in ready to go on contract condition. Major oil companies and operating companies will require a history of good Rig Maintenance.
This Workover Rig Maintenance program consist of a complete maintenance schedule for all the equipment listed below. Any item listed on any of the check list worksheets can be changed and edited to suite any Workover Rig and any piece of equipment. It also covers Diesel Haulers and Water Haulers if you own your own trucks. Any item can be removed or changed to suite your Workover Rig and equipment.
The program consists of 55 check lists, We can customize the program with your company logo before shipping
Main Control Console
Fire Fighting Equipment
Personnel Protection Equipment
Job Risk Analysis
The program keeps a complete record of all maintenance carried out
An introduction to the new Workover Rig maintenance program.
The Tubing Movement program is included in the Workover Office Pro version.
This separate version is just for quick reference for those that don’t need all the multiple functions of Workover Office Pro
This includes all tubing movement calculations. This program is included in the Packer Calculations software. Force
Stretch/Contraction Length Changes due to
Plus a basic estimated BHT chart
Tank Volumes including Flow Rates for Round Tanks, Square Tanks, Vertical Tanks, Round Horizontal Tanks and tank straps
This tank volume and flow rate program gives you volumes and flow rates in various units of measure , partial volumes, tank strap charts for Round Vertical tanks, Square tanks and Horizontal Round tanks. Plus Flow Rates into any size tank or vessel from a coffee cup, dope bucket to a million Bbl tank
Printable Tank Strap Charts can be selected to give you both API and Metric options Chart selection
The Well Head Xtree Schematic is a complete system for building a land based Well Head with a library of hi-resolution Drilling Spools, Flanges, Valves and Chokes, simply click on a component and drag it into place on your Well Head Sketch. The latest version includes a dual completion tubing spool
Options to Print or Export the Graphic to your well file for future reference and professional looking completion well bore report.
The Tubular Database give you reference to over 4100 different joints of pipe,Tubular database includes oil well casing and tubing specifications from 48″to 1.05″
Once the casing or tubing is selected you have full data regarding weight on hook annular volumes and capacities in either Bbls or Cu/ft for cementing calculations. Tubular Database also includes a casing Pressure Test function which allows you to run a casing pressure test after cementing is completed with a visual indicating and pressure drop. chart
Once the casing or tubing is selected you have full data regarding Weight on Hook, Burst, Collapse, Drift Size, Weak Member. Annular volumes and capacities in either Bbls or Cu/ft and a casing pressure test chart
4127 different tubular specifications in the database.
Balanced Cement Plugs, Oilwell balanced cement plugs P & A plugs
Buffer fluid ahead of cement slurry
Planned volume of cement slurry
Buffer fluid behind the cement slurry
Actual slurry volume pumped
Pipe in cement height
Pipe out cement height
Planned slurry volumes vs Actual slurry volumes
This is can be used as an add in for DrillPro
Includes Water or Flushing chemicals ahead and behind plug calculations, pipe in cement top pipe out cement top, and since no cement job is 100% accurate the program produces both calculated and actual cement tops based on the slurry volumes pumped, Output graphic is printable and can be selected in either API and Metric units.
Electric Submersible Pump Completions, (ESP)
For both the man in the field and workover office coordinator keeping track of well files. The ESP completion report is a detailed report, complete with the production string, pump data and components. Once the basic well data header and well data is entered the report can be emailed to the client or head office. everything is is updated with a simple button click including a professional looking completion graphic.
The program includes a complete library of completion graphics for ESP completions. Tubing,casing, nipples, gas buster, protector, pump using hi-resolution graphics for visual impact.
The output includes the detailed string and pump report plus the well bore schematic.
Print, Export, Email the pump data and tally sheets