Smart Phone Drilling Hydraulics

Smart Phone Drilling Hydraulics,

Simple API Hydraulics
Enter the Hole Geometry, Drill String Data and pump data
The program allows 1 section of DP,HWDP and DCs
Tap the … to see all the data
The program will give you Capacities, Displacements,, Btms up, lag times, ECD at DP, HWDP. and DCs

Smart Phone App Swab Surge

Smart Phone App Swab Surge.

The Smart Phone App Swab Surge for Drill Strings calculator will help you avoid breaking down the formation during RIH and avoid swabbing gas or fluids into the well bore during pulling out of the hole.

This Smart Phone App Swab Surge will calculate the increase in the equivalent  Mud weight (EMW) during RIH and the reduced EMW durng POH

Swab and Surge pressures are based on the running or pulling velocity in minutes and seconds for each stand of pipe.
The calculations are based on the Power Law for drilling fluids
Enter your string data along with the mud characteristics
You can edit any of the sample inputs  string data by tapping the … or enter your own drill string data.

Smart Phone App Maximum Casing Running Speed

Smart Phone App Maximum Casing Running Speed

Smart Phone App Maximum Casing Running Speed, for iPhone OS, Android, Smart phone app, Maximum running speed for oil well casing, drilling mud surge is calculated during RIH,  warnings will show if the running speed creates a surge greater than the formation breakdown mud weight

Smart Phone App Maximum Casing Running Speed, iPhone OS, Android, Smart phone app, Maximum running speed for oil well casing, drilling mud surge vs formation breakdown. Calculations are based on the power law for drilling fluids and require the VG meter 300 rpm and 600 rpm readings
You can turn your phone horizontal to see full view labels

Smart Phones App Tubing Movement

Smart Phones App Tubing Movement

 

Enter the Pipe data, packer depth, est BHT etc the program will calculate tubing movement  forces and changes to the tubing string.

  • Piston effect
  • Ballooning effect
  • Buckling effect
  •  also length changes due to temperature effect

For incomplete labels due to length turn your phone horizontal

Smart Phone App Balanced Cmt Plugs

Smart Phone App Balanced Cmt Plugs

The program is based on the actual slurry used, if you pump water ahead of the cement the program will calculate the volume in Bbls to pump behind the cement to balance the plug
The results show the height of the cement plug with pipe in and pipe out also the height of the cement above the top perforation or casing leak. So that you have a reference to the amount of plug to displace without over displacing
To make a new entry simply edit the sample well data by tapping on the …

 

Fuel Analysis Smart Phone App

Fuel Analysis gives you a quick and easy to use fuel analysis program app for your smart phone or tablet

The program keeps track of mileage/Km,  the cost per mile/KM and how much fuel you purchase (Bang for your buck)

You can turn your phone or tablet horizontal to get more detailed information

Date purchased, Qty, Cost, record of trip and cost per trip , cost per mile/Km total miles/Km

Any increase in cost per mile/Km indicate time for a service

A complete record of

  • How much you spent,
  • How much you got,
  • How  far you went on it
  • How much it cost you per Mile/Km
  • If your consumption goes up it’s time to get a service!

Most of the time you look at the fuel gauge and figure,  Mmm!  it’s time to spend some money and put something in the tank. You drive off with no record of how much you got for your bucks or how far your money took you.

Smart Phone App Free Point Indicator

Smart Phone App Free Point indicator

Based on Youngs Modulas for steel. The Smart Phone App Free Point indicator  will calculate the depth of free pipe. Simply enter the over pull and amount of stretch in inches

The program is part of the new Drillingsoftware programs for Smart Phones

Enter all the Hole Geometry and String Data
After that all you need to do is enter the Over Pull in (lbs) and Stretch in (ins)
The App will give you the calculated Free Point. No need to wait for the wire line unit to tell you where you are stuck.

The program allows you to input up to 4 sections of Drill Pipe, 3 sections of Heavy Weight Drill Pipe and up to 3 sections of Drill Collars